ENGL E642II Invader II Limited Edition Tube Head White

Limited to just 30 units worldwide!

Can an extremely successful amp like the original Invader be improved at all? The answer is: yes! Meet the Invader II. If you’re on the hunt for peerless tones and variety, the Invader II gives you a flexibility that is second to none. A whopping number of 16 (yes, 16!) sounds are the base from which you can discover new worlds of sound. You can also optionally use the Sound Wizard Module (SWM Z16) with the Invader II - a slot and connection port on the back of the amp are ready for this purpose. Using the Z16’s 96 micro rocker switches, you can comprehensively tweak your tones at any gain setting… it’s a dream come true for all tone hunters! And if you’re wondering where the 16 ‘base’ sounds come from: there’s four channels, each with low and high gain modes (for a total of eight sounds), plus the Sound switch, which alters your tone based on your channel and gain settings (and making for a total of 16!). All this is, of course, controllable via MIDI, and with a 3-band EQ per channel, noise gate and comprehensive connection options on-board, there’s nothing the Invader II can’t do!

Features
4 Channels: Clean, Crunch, Lead 1, Lead 2
All Tube Head
2 Tube buffered FX Loops (each with Balance control)
Noise Gate
Master A/B
Power Tube Monitor
Connection Port for the optional ENGL Z16 Sound Wizzard Module
Ground Lift Switch
MIDI: MIDI in / MIDI thru
Engl Midi-Footcontroller Phantom Power Switch
MIDI Channel Assignment and Controller Enable Switches
Write / Copy (for MIDI programming)
all functions accessible on the front panel are MIDI programmable
S.A.C.: Serial Amp Control
Sound Options
Sound
Hi Gain
Sound Wizzard Module (optional)
Controls
Gain (for each Channel)
3-Band EQ (for each Channel)
Volume (for each Channel)
Presence
Depth Punch
Master A
Master B
Noise Gate Threshold Level
Low / High Gain Volume Ratio Control (for each Channel)
FX Loop I Balance
FX Loop II Balance
Outputs
Poweramp Output (1 x 4 Ω, 1 x 8 Ω, 1 x 16 Ω, 2 x 8 Ω ||, 2 x 16 Ω ||) - Pre Output - Line Out
Footswitch
Z4 (Channels)
Z9 (Master A/B, Hi Gain, Noise Gate, Amp Mute, Sound, FX Loop)
Z12
Z15
Preamp Tubes
4 x Engl ECC83 / 12AX7
Output Tubes
4 x Engl KT77
Output Wattage
100 W
Dimensions
71 x 27 x 29 cm
Weight
22.5 kg