EWI Jack-Jack TS 16-Ch Multi-Track Loom

EWI Jack-Jack TS 16-Ch Multi-Track Loom

EWI Dual Fantail 12 Channel 15ft Patch Snake XLR-XLR

The EWI MTFM / KTFM -12 series snakes are professional quality dual fantail XLR patch snakes
$249.00
Availability: In stock
SKU
EWI-KTFM-12-15

The EWI MTFM / KTFM -12 series snakes are professional quality dual fantail XLR patch snakes.  This snake is typically used to extend a snake, used as a drop snake, or used for patching effects.  Longer versions are commonly used for drive snakes.

The male XLR fantail end has a mesh grip strain relief. On each XLR fantail, the channels are clearly labeled with indelible ink printed on the tubing at each connector.  The channels are labeled 1 through 12, and they are color coded in groups of 4 each.  The groups are bundled with 3 short, loose fitting pieces of clear loom that can be slid up or down the fantail as desired.  This helps keep the fantails from getting tangled and facilitates easy channel identification. The fantail length is about 20" giving you about a 36" to 38" functional spread.

The 75 ft., 100 ft., and 200 ft. versions are typically used as drive snakes to send the return signal from the FOH mix position to the amp racks on stage.  These lengths have approximately 22" fantails, and a mesh grip strain relief hanger at each fantail.

The KT series cable is constructed with EWI SMK series cable with 99.98% pure 25ga. high strand count copper conductors and individually jacketed pairs shielded by 100% coverage spiral shield on each pair.  The connectors are all EWI ES3B-GDP XLR models, black anodized cast zinc XLR bodies with gold plated contacts. The MT series cable itself is constructed with EWI SMM series cable with 99.98% pure 22ga. high strand count copper conductors and individually jacketed pairs shielded by 100% coverage spiral shield on each pair.

Features:

  • 12 ch. Male XLR on one fantail and 12ch. Female XLR on the other fantail.
  • Rugged construction
  • Extremely well labeled
  • Good noise rejection
  • 22ga. & 25ga. conductors
  • Standard 3 pin XLR connectors
  • Hand assembled/ soldered ends
  • Mesh grip strain relief on the Male XLR fantail.
  • Fantail Length:  Approximately 20"

Applications:

  • Snake extension
  • Drop snake
  • Effects patching
  • Drive snake (75ft., 100ft. and 200ft. lengths)

 

Specifications
Clearance Item No
Brand EWI
Write Your Own Review
You're reviewing:EWI Dual Fantail 12 Channel 15ft Patch Snake XLR-XLR
Your Rating