The black Lone Pine Series LP-6 6.5″ Active Studio Monitor from Kali Audio is designed for you to hear every detail that’s happening in your mix during recording, broadcast, and mixing applications. It features an accurate frequency response and a 3D-imaging waveguide with nothing boosted or suppressed to cover flaws or try to make the sound more pleasing.
Built with a low-noise port tube, this speaker delivers clean, punchy bass. The dual-layer, large diameter voice coil keeps the sound clear and free of distortion. Other features include: boundary EQ dip switch tuning to tailor common placement positions in a space, balanced XLR, TRS, and unbalanced RCA inputs, and HF and LF input trim controls.
Additionally, the Lone Pine Series LP-6 6.5″ Active Studio Monitors allow you to mix with more confidence, and you can be assured that your mix will translate as best as possible to whatever systems your audience is using.
The waveguide on Project Lone Pine monitors allows you to hear spatial details and a soundstage that is wider, taller, and deeper than the space between the speakers themselves.
The dual-layer, large diameter voice coil in the LP Series monitors helps keep the sound clear and free of distortion.
The LP-6 has a clean, punchy bass for a front-ported speaker with very low noise from the port tube.
At continuous reference-level output, the LP-Series monitor has at least 20 dB headroom at the listening position. The LP-6 has enough output for most one to two person setups. Ample headroom ensures that loud mixes with high dynamic range will come through clearly.
Bass on the LP-Series monitor is delivered by larger magnets and larger voice coils. This gives you more accurate bass response that extends lower, so you can dial in the low-end sound you need.
A speaker placed against a wall or on a desk will sound very different than a speaker placed on a stand, even in a well-treated space. Kali’s team did our Boundary EQ tuning and came up with boundary compensation EQ settings to help you get the optimum sound for where you need to put your speakers. Combined with the LF and HF trims, this will ensure that the speakers sound their best no matter what room you’re mixing in, or where the speakers are placed.
The LP-6 features balanced XLR and TRS inputs, and an unbalanced RCA input. The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.
The integrated Class-D Power amplifier delivers clean, reliable power that’s optimized to this speaker. It uses 40W for the 1″ soft-dome tweeter and 40W for the 6.5″ woofer.
