Shure SM86 Condenser Vocal Mic

Shure SM86 Cardioid Condenser Vocal Mic

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering studio-quality sound. The tailored frequency response of the SM86 reproduces vocals with clarity. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in 3-point shock mount minimizes handling noise, and a 2-stage pop filter reduces wind and breath "pop" noise. The SM86 is an excellent selection for use with both stage monitors and personal in-ear monitors.

Shure SM86 Cardioid Condenser Vocal Mic

• Condenser cartridge for studio quality sound

• Tailored frequency response for a clear reproduction of vocals

• Rugged construction withstands the rigors of touring sound

• Cardioid polar pattern minimizes unwanted background noise

• Excellent choice for stage monitors and personal monitors

• Built-in three-point shock mount minimizes handling noise

• Two-stage "pop" filter reduces wind and breath noise

SM86 Cardioid Condenser Vocal Mic Specifications :

• Transducer type : Condenser (electret bias)

• Frequency response : 50 to 18,000Hz

• Polar Pattern : Cardioid

• Output Impedance : 150Ω at 1kHz (Recommended minimum load impedance: 600Ω)

• Sensitivity (at 1,000Hz) : Open Circuit Voltage: -50dBV/Pa (3.15 mV) (1 Pa = 94dB SPL)

• Output Clipping Level : 1000Ω Load at 1,000Hz: +3dBV (1.41 V)

• Maximum SPL (at 1,000Hz) : 1000Ω load (1% THD) : 147dB

• Self-Noise : 23dB typical, A-weighted

• Dynamic Range (1000Ω) : 124dB (maximum SPL to A-weighted noise level

• Signal-to-Noise Ratio : 71dB at 94dB SPL (IEC 651)*

• *S/N ratio is difference between 94dB SPL and equivalent SPL of self-noise A-weighted

• Polarity : Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.

• Power (Phantom Supply Requirement) : 11 to 52 VDC, positive at both pins 2 and 3

• Current Drain : 5.2 mA

• Connector : Three-pin (XLR) professional audio

• Dimensions (H x W) : 183mm x 49mm, 7.2" x 1.92"

• Net Weight : 278g (9.8oz.)

• Environmental Conditions;Operating : -18° to 60° C (0° to 135° F) (relative humidity >90%), Storage: -29° to 74° C (-20° to 165° F) (relative humidity >80%)