Vox VE-CD Valvenergy Copperhead Drive Pedal

VE-CD Valvenergy Copperhead Drive Distortion Pedal

VE-CD Valve distortion pedal with an all-analog signal path brings iconic amp sounds for your pedalboard. This Copperhead valve distortion pedal recreates a classic full stack amp tone, used for the powerful sound of rock in the 80s. Can be used for overdriven tones or thick distortion. Three output modes - standard pedal, a line-level preamp, and a direct amp-sim.

Iconic amp sounds for your pedalboard.

The Copperhead valve distortion pedal recreates the classic full stack amp tone, used for the powerful sound of hard rock in the 80s. Use it for lightly overdriven tones or thick distortion.

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analogue cabinet simulator. Use STANDARD mode with your normal guitar rig to totally transform your amp, or use PREAMP or CAB-SIM mode while recording directly into your audio interface. In each mode, the all-analogue design and active EQ allow you to perfectly dial in the sound you need in any situation.

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a with a standard 1/8” stereo cable will link 2 pedals, and using a stereo 1/8” splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others, as if you were switching between channels of a guitar amp.

These pedals are equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display allows shows which mode you are currently using.