My Cart
You have no items in your shopping cart.
The updated DELTA-AX series features improved internal electronics. The newly designed power components ensure high performance and extreme reliability.
Key Features
|
|
Dual mic inputs with combi-jack connections for line inputs.
RCA inputs for easy connection to consumer level audio sources.
Hands-on EQ control for Hi and Low frequencies
Balanced Link output to connect to more active loudspeakers.
Hi Pass filter switch to roll off low end when using in a monitor position.
Not only does this create a solid and durable cabinet, but also contributes to the overall sound.
DELTA-AX is also covered in our most durable and hard wearing Rhino Rock paint finish. This ensures that a DELTA-AX will always look as good as the day you unboxed it.
This fresh design helps to distinguish between the original DELTA-A models and the updated DELTA-AX models.
It is also a logo to be proud of. A logo that lets your audience know that the sound of your even will be of the highest possible quality.
Using convection cooling, DELTA-AX models do not use any internal fans. Fans add to product weight, ambient noise and can lead to unreliability. DELTA-AX has no fans!
The two amplifiers are dedicated to each driver. One amp for the HF and one amp for the LF. This perfect matching ensures that the DELTA-AX is highly efficient, converting as much as the laws of physics allow to be converted into audible output power.
SPECIFICATIONS
Model Name | DELTA-AX12 |
System type | Active 2-way bi-amplified |
Frequency response (+/-3dB) | 60Hz-20kHz |
Frequency range (-10dB) | 55Hz-20kHz |
Calculated Max SPL @1m | 130dB |
LF Transducer | 12" |
Coil size | 3" |
Impedance | 4Ω |
HF Transducer | Compression driver |
Coil size | 2" |
Exit size | 1.4" |
Diaphragm material | Titanium |
Impedance | 8Ω |
Nominal coverage | 90° x 45° |
Amplifiers | |
LF Power amp | 650w RMS Class D |
HF Power amp | 100w RMS Class D |
Protection | Power switch on / off mute, Thermal, Low line voltage, DC and Short, Clip limiters |
Hardware | M10 x 6 |
Dual angle 35mm pole socket | |
2 x Rubberised 4-way handles | |
Enclosure | 15mm plywood |
Rhino rock paint | |
Grille material | 1.2mm Steel |
Unpacked | |
Height | 650mm / 25.2" |
Width (Front) | 390mm / 15.35" |
Width (Rear) | 241.2mm / 9.5" |
Depth | 373mm / 14.69" |
Packed | |
Height | 745mm / 29.3'' |
Width (Front) | 566mm / 22.3'' |
Width (Rear) | 328mm / 12.9'' |
Depth | 464mm / 18.3'' |
Weight Net | 27.9kg / 61.2lbs |
Weight Gross | 32.5kg / 71.5lbs |