Wharfedale Pro Titan 12 Passive Speaker Black

Wharfedale TITAN - 12 Passive Grey

Titan™ 12

Wharfedale Pro Titan™ 12 series with 12"/2" voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90°x60° Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the Titan™ series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.

The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or "dry" club type acoustic environment The Titan™ 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.

For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. Titan™ 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.

Features

• Proprietary 90 x 60 Elliptical Wave Guide Horn design
• Custom Heavy duty moisture-proof 12" LF driver
• High-end Titanium HF Compression Driver
• Tough Polypropylene molded cabinet with rubber padded handles
• Multiple M8 rigging points and integral tripod stand adapter
• Rugged protective grille and top-stacking receptacles
• Trapezoid shape for arrays as well as stage monitor applications
• DTF™ - High-Frequency Driver Overload protection
• Sophisticated Linkwitz-Riley 24dB/octave crossover design
• High-Frequency EQ switch (boost/flat) for long-throw applications
• Both 1/4" and NL4 connectors provided
• Available in grey & white

SPECIFICATIONS

MODEL : TITAN 12 PASSIVE

GENERAL INFO :

• SYSTEM TYPE 12" 2-way passive
• FREQUENCY RESPONSE +/- 3DB 55-20kHz
• SENSITIVITY (DB 1W@1M) 98dB
• SYSTEM IMPEDANCE 8 ohms
• MAXIMUM SPL PEAK DB 128dB

POWER HANDLING (WATTS) :

• CONTINUOUS RMS 250
• PROGRAM 500
• PEAK 1000

LF DRIVER :

• LF DRIVER SIZE MM / INCHES 1x12"
• LF VOICE COIL SIZE 64.26mm/2.5"

HF SECTION :

• HF VOICE COIL SIZE 44mm/1.75"
• HF TYPE Compression Driver
• HF DIAPHRAGM MATERIAL Titanium
• HORN DISPERSION (H X V) 90 x 60
• HF EXIT SIZE MM / INCHES 25mm/1"
• HF HORN SHAPE EWG™ - Elliptical Waveguide
• HF PEAK INDICATOR Peak LED ring in horn throat

CROSSOVER SECTION : Type: 2-way

CROSSOVER FREQUENCY / FILTER : 2.4 kHz / Linkwitz-Riley
HF DRIVER PROTECTION DTF™ - 175 Dynamic Thermal Filament
HF EQ (BOOST / FLAT) 3dB boost (long-throw) / Flat (near-field)

PHYSICAL FEATURES :

• FINISH Black or White
• HANDLE QUANTITY 2 carry handles (one on each side)
• SUSPENSION POINTS (10) M8 points for safe flown applications, (4) M8 inserts on bottom in • OmniMount® 60.0-type footprint
• STAND ADAPTER - BOTTOM Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket
• STAND ADAPTER - TOP Optional dual-unit array speaker stand hardware
• ENCLOSURE TYPE Molded Polypropylene
• ENCLOSURE SHAPE Trapezoidal for vertical array and horizontal stage monitor applications

IN / OUT PANEL (SPEAKER LEVEL) : INPUT CONNECTOR 2 x 1/4" jacks and2 x Speakon™

DIMENSIONS & WEIGHT :

• HEIGHT ( MM / INS ) 556mm/21.88"
• WIDTH FRONT / REAR / MM / INS 384mm/15.1" / 180mm/7.1"
• DEPTH ( MM / INS ) 312mm/12.3"
• NET WEIGHT ( KG / LBS ) 12kg/26.4lbs
• GROSS WEIGHT ( KG / LBS ) 14kg/30.8lbs